shamspayyoli

PLEASE NOTE:
Sim card cloning is illegal in some countries,
This guide is for educational purposes only.
What hardware you will need:
1. Sim card reader
2. Wafer card programmer
3. Empty sliver pic 2 card
4. Mains unregulated adapter
5. 9 Pin male to female extension cable
What software will you need :
1. Cardinal 68
2. Card master
3. You will also need Sim emu
Lets get started
Plug your Sim Reader in to your comport
Run cardinal and click where it says "click here" click Settings.
Select your com/serial Port and the Baud Rate, press Close when done
Now left click where it says "click here" Go to smartcard from there click Sim editor.
The program will start from the menu got to SIM then Sim Info and click the load button shown above.
You will see the "IMSI" Code after pressing load
Take note of the "IMSI" and keep it safe
Now close the Sim info window and from the menu go to Security then Find Key KI
Click start on the Find KI window and wait...
It will take up to 4 hours to find the Ki

Click start on the Find KI window and wait...
It will take up to 4 hours to find the Ki
Take note of the "KI" and keep it safe
You are now finished reading the Ki and Imsi

NEXT STEP
Loading Sim Emu !
Buy an Empty Silver Card
In the Unzipped/Unpacked file you will find
SEE50s.hex = Eeprom
SEF50sEN.hex = PIC
Connect the programmer to a com port and go to the setup menu and choose the appropriate com port, when this is done
There should be a yellow rectangle at the bottom of the program telling you there is no card
Insert the smartcard to the programmer, the rectangle should now change colour to green
Choose Silver card from Card type
Push the open button and choose SEF50sEN.hex
Push the open button and choose SEE50s.hex

.Press the edit menu and push Auto Program
Cutting the card
Configuring your card !
Insert the Silver we have trimmed in to the phone it may ask for pin
its 1111
From the menu go to Sim Emu
From Sim Emu 5 Menu go to Set Phone #
Select GSM #1 or any Slot
Select Configure
.Select Edit #
Edit GSM # X to any name
After done press OK then go to Config. PoS.
It will ask for PIN2 its 1234
.It will ask you what position you want that card to be Select a Position 1 to 8
It ask you to enter the IMSI You got from Cardinal
It ask you to enter the KI You got from Cardinal
It will ask you to enter you PUK enter any up to 8 Digits
It will ask you to enter you PUK enter any up to 4 Digit
Exit the settings and go to Reset
AND THAT'S THAT
IF EVERY THINK WENT ACCORDING TO PLAN THEN YOU WILL NOW HAVE A CLONED SIM CARD.
http://depositfiles.com/en/files/cq4qu7sgk